大型多線切斷機

手機掃描查看

 大型多線切斷機about" style="margin: 0px auto; padding: 10px 10px 0px; border: 0px; color: rgb(61, 61, 61); font-family: SimSun, Arial; font-size: 12px;">

 

本機采用金剛砂線鋸技術，用于切割單晶硅棒、多晶硅方棒。在2米的長度范圍內可一次切割最多7個鋸口，鋸口刀縫小，平行度好，加工效率高，是硅棒加工高效新型機器。	The cutter is used to cutting mono-crystal silicon rod and poly-silicon cube with the technology of monocrystalline wire saw. It could cut seven kerfs at most in the length of two meters in one running distance.
1.加工規格：  單晶棒直徑Φ155～230mm 長度2000mm    多晶方棒230×230mm（方）×260（長）7根  2.金剛砂線規格：  Φ0.25～0.35mm3.切割進給速度：0～3.5mm/min  4.金剛線消耗：  回線率≥99%  5.機器總功率：  小于20KW  6.外形尺寸：  3540×3200×2000mm（長、寬、高）  7.重量：   約6.5T	Product type: mono-crystal silicon Φ155-230mm,length  2000mm, poly-silicon cubic rod 230×230×260mm(height)seven slices emery wire: Φ0.25-0.35mm running rate: 0-3.5mm/min emery wire loss: ≤1%Power: less than 20KW size: 3540(length)×3200(width)×2000mm(height) Weight: about 6.5TMain parameter